This is a left hand 1955 factory type outer rocker panel that fits all 2 door models. Be sure to pick up rocker end caps and fender brackets for a complete job
We will contact you with shipping charges.
This is a right hand 1955 factory type outer rocker panel that fits all 2 door models. Be sure to pick up rocker end caps and fender brackets for a complete job
This is a left hand 1955 rear outer wheel well extension that connects to the middle outer wheel well section. This fits the 2 door hardtop, sedan and convertible.
Cart does not calculate shipping charges; we will contact you with amount.
This is a right hand 1955 rear outer wheel well extension that connects to the middle outer wheel well section. This fits the 2 door hardtop, sedan and convertible.
This is a passenger side 1955 and 1957 OEM factory style door skin for the 2 door hardtop and convertible. It does not have the top flange. Oversize shipping applies
This is a drivers side 1955 and 1957 OEM factory style door skin for the 2 door hardtop and convertible. It does not have the top flange.
This is a left hand 1955 outer trunk to quarter panel filler. This is a partial filler pan, for a full version order #13299. It fits all models except the Nomads and wagons.
This is a right hand 1955 outer trunk to quarter panel filler. This is a partial filler pan, for a full version order #13300. It fits all models except the Nomads and wagons.
A little spot of rust, no need to worry about replacing the entire fender. Fight back against one of the more common rust areas by getting one of these lower front fender sections. This is a left hand 1955 lower front fender section.
A little spot of rust, no need to worry about replacing the entire fender. Fight back against one of the more common rust areas by getting one of these lower front fender sections. This is a right hand 1955 lower front fender section.
This is a right hand 1955 lower front quarter panel section. Quality craftsmanship has gone into these newly retooled 2 door quarter panel sections. CARS has greatly improved two already popular items to simplify your body work. A significant feature of this item is that it's flanged with a material offset to greatly ease the installation process. The door jamb has the original contours. It's made in the USA. The section measures 20 inches by 40 inches. Oversize shipping applies.
Cart does not calculate shipping charges. We will contact you with shipping charges.
Bring your rusted door back to life with a patch from CARS Inc. If your door skin is in good shape except for the bottom, try one of our lower half patches for the drivers side 1955-57 2 door models. You'll be cruisin' in style again in no time.
Bring your rusted door back to life with a patch from CARS Inc. If your door skin is in good shape except for the bottom, try one of our lower half patches for the passenger side 1955-57 2 door models. You'll be cruisin' in style again in no time. Oversize shipping applies.
This is a left hand 1955 full factory lower quarter panel section. It's made from top quality, heavy gauge sheet metal. The panel section is from just below the chrome line with a welding flange and a bumper bracket hole. When using on a 2 door sedan, you must use the original sedan door jamb. Oversize shipping applies.
Cart does not calculate shipping. We will contact you with shipping charges.
This is a right hand 1955 full factory lower quarter panel section. It's made from top quality, heavy gauge sheet metal. The panel section is from just below the chrome line with a welding flange and a bumper bracket hole. When using on a 2 door sedan, you must use the original sedan door jamb. Oversize shipping applies.
Cart does not calculate shipping; we will contact you with shipping charges.
This is a left hand 1955 front splash shield. These are the rear potions of the inner front fender.
Cart does not calculate shipping; we will contact you with shipping.
This is a right hand 1955 front splash shield. These are the rear potions of the inner front fender.
Cart does not calculate shipping charges; we will contact you with shipping.
Look no farther for this hard to find item. CARS Inc. has you covered. This gas door filler bracket goes on the 1955 Chevrolet left hand quarter panel (#9106).
Cart does not calculate shipping; we will contact with shipping charges.
This is a left hand 1955 factory type headlight cap. CARS Inc.'s headlight caps are built to original specifications using heavy gauge sheet metal. It's made in the USA.
This is a right hand 1955 factory type headlight cap. CARS Inc.'s headlight caps are built to original specifications using heavy gauge sheet metal. It's made in the USA.
Cart does not calculate shipping; we will contact you with charges.
This left hand 1955 front fender support bracket connects the fender lip to the inner fender. It is located within the wheel well opening area.
This right hand 1955 front fender support bracket connects the fender lip to the inner fender. It is located within the wheel well opening area.
This is a left hand 1955 full factory quarter panel for the 2 door hardtop and convertible. There's nothing flimsy about these heavy gauge sheet metal quarter panels from CARS Inc. They have the pre-drilled holes for your Bel Air trim assembly. The panel includes a partial door opening profile and outer rocker flange. The quarter panel can be modified to fit the 2 door sedan and wagon. Truck freight. We will contact you with shipping charges.
Quarter panel also available with no holes. Phone to inquire.
This is a right hand 1955 full factory quarter panel for the 2 door hardtop and convertible. There's nothing flimsy about these heavy gauge sheet metal quarter panels from CARS Inc. They have the pre-drilled holes for your Bel Air trim assembly. The panel includes a partial door opening profile and outer rocker flange. The quarter panel can be modified to fit the 2 door sedan and wagon. Truck freight. We will contact you with shipping.
This is a left hand 1955 front fender rear brace.
This is a right hand 1955 front fender rear brace.
This is a 1955 headlight mounting bracket. CARS Inc.'s headlight mounting brackets are built to original specifications using heavy gauge sheet metal. It's made in the USA.
This is a 1955 lower rear fender to rocker panel bracket. It comes as a four piece set, which includes the rocker panel end caps.
These heavy gauge sheet metal outer trunk lids will have your Chevrolet looking great in no time. This 1955-56 trunk lid skin is made as a replacement for your rusted or damaged original. The trunk lid does not have pre-drilled holes. Truck freight.
These heavy gauge sheet metal outer trunk lids will have your Chevrolet looking great in no time. This 1955-56 trunk lid skin is made as a replacement for your rusted or damaged original. The key holes are pre-drilled on the trunk lid. Truck freight.
This is a right hand 1955 1956 1957 OEM factory style door skin for the 2 door sedan. It has the top flange, however, the window frame is not included.
This is a left hand 1955 full quarter panel for the Nomad. It can be modified to fit the 2 door sedan and wagon. The edges are rolled into the openings. This panel does not have holes. Truck freight.
This is a right hand 1955 full quarter panel for the Nomad. It can be modified to fit the 2 door sedan and wagon. The edges are rolled into the openings. This panel does not have holes. Truck freight.
This is a left hand 1955 outer trunk to quarter panel filler. This is a full panel filler. For a parital panel filler, order #1082. The full panel filler fits all models, except the Nomads and wagons.
This is a right hand 1955 outer trunk to quarter panel filler. This is a full panel filler. For a parital panel filler, order #1083. The full panel filler fits all models, except the Nomads and wagons.
This heavy gauge 1955 steel hood is made in the USA, and will fit all models. It comes as a welded assembly (inner and outer), and is a beautiful reproduction for your 1955 Chevy. This sturdy hood is ready to bolt on to your car, with pre-drilled holes for hinges and trim. Hood must ship by truck freight.
Each. This bracket connects the fender to the upper cowl bracket. The bracket will fit the left and right hand sides. It will work on all 1955 Chevrolet models.
This left hand cowl to fender mount bracket fits the 1955 Chevrolet models. It connects the cowl to the front fender mount bracket.
The right hand bracket is part #16254R.
This right hand cowl to fender mount bracket fits the 1955 Chevrolet models. It connects the cowl to the front fender mount bracket. Order 16243L for left side.
This is a drivers side 1955 and 1957 OEM factory style door skin for the 2 door hardtop and convertible. It has the top flange.
This is a passenger side 1955 and 1957 OEM factory style door skin for the 2 door hardtop and convertible. It has the top flange.
This is a 6 piece access hole cover set for the 1955-1957 convertible.
Cart does not calculate shipping charges; we will contact you.
Pair; fits all 2 door models.
Cart does not calculate shipping on this item; we will contact you with shipping charges.
This is a 1955-57 tail pan for all models except the wagon and sedan delivery. This tail pan is made from heavy gauge sheet metal and will increase the structural integrity to your trunk area. It's made in the USA.
Cart does not calculate shipping; we will call you with actual shipping charges.
This is a left (driver) side 1955-1957 inner door bottom. It fits the 2 door hardtop and convertible. It can be modified to fit the 2 door sedan, wagon and Nomad.
Cart does not calculate shipping; we will contact you with actual shipping charges.
This is a right (passenger) side 1955-1957 inner door bottom. It fits the 2 door hardtop and convertible. It can be modified to fit the 2 door sedan, wagon and Nomad.
Cart does not calculate shipping; we will contact you with actual charges.
This is a 1955-57 tail pan for the Nomad, wagon and sedan delivery models only. This tail pan is made from heavy gauge sheet metal and will increase the structural integrity to your trunk area. It's made in the USA.
This is a 1955-57 tailpan brace that will fit all models except the wagon models. The brace is connected to the bottom of the tail pan for extra structural integrity in the rear trunk area. It's made from heavy gauge sheet metal in the USA.
Cart does not calculate shipping charges; we will contact you with actual charges.
Don't let that necessary spare tire get in the way. Keep your spare where it belongs. CARS Inc. 1955-1957 spare tire well is the perfect solution. It fits all models except the wagon and sedan delivery.
This is a center long floor brace for all the 1955-57 models except 4 door hardtop.
This is a left (driver) side 1955-57 rear short floor brace that fits the hardtop and convertible models only
This is a right (passenger) side 1955-57 rear short floor brace that fits the hardtop and convertible models only.
This 1955-57 front long floor brace fits all models except the convertible and 4 door hardtop.
This 1955-57 front long floor brace only fits the convertible models.
This is a 1955-57 front short floor brace that goes underneath the front floor.
This is a left (driver) side 1955-57 inner rocker panel that fits all models.
This is a right (passenger) side 1955-57 inner rocker panel that fits all models.
This is a right (passenger) side 1955-1957 front floor pan that replaces the original made from OE gauge steel. It fits all models.
This is a left (driver) side 1955-1957 front floor pan that replaces the original made from OE gauge steel. It fits all models.
This left (driver) side 1955-1957 rear floor pan fits all models except the convertible.
This right (passenger) side 1955-1957 rear floor pan fits all models except the convertible.
This is a left (driver) side 1955-57 floor brace that goes underneath the seat.
This is a right (passenger) side 1955-57 floor brace that goes underneath the seat.
This 1955-1957 transmission hump floor pan fits all models
This left (driver) side 1955-1957 front floor brace is located near the cowl area. This brace fits all models.
This right (passenger) side 1955-1957 front floor brace is located near the cowl area. This brace fits all models.
This left (driver) side 1955-1957 middle outer wheel well section connects and goes between the front outer wheel well section and the rear extension. This fits the 2 door hardtop and convertible.
This right (passenger) side 1955-1957 middle outer wheel well section connects and goes between the front outer wheel well section and the rear extension. This fits the 2 door hardtop and convertible.
This left (driver) side 1955-57 front outer wheel well section connects the rocker panel to the middle outer wheel well section, which is part #1062. This wheel well is for the 2 door hardtop.
This right (passenger) side 1955-57 front outer wheel well section connects the rocker panel to the middle outer wheel well section, which is part #1063. This wheel well is for the 2 door hardtop.
This left (driver) side 1955-1957 outer wheel well section connects the rocker to the middle of the wheel well, which is part #1062. This wheel well is for the convertible.
This right (passenger) side 1955-1957 outer wheel well section connects the rocker to the middle of the wheel well, which is part #1063. This wheel well is for the convertible.
This is the 1955-57 rear trunk floor section. The floor piece has all of the correct indents, lines and configurations. This piece fits all models except the wagon models.
This is a left (driver) side 1955-57 front floor pan that goes underneath the front seat. It fits all models.
This is a right (passenger) side 1955-57 front floor pan that goes underneath the front seat. It fits all models.
This is a left (driver) side 1955-57 side trunk floor for all models except the wagons.
This is a right (passenger) side 1955-57 side trunk floor for all models except the wagons
This is a left (driver) side 1955-1957 inner front quarter panel for the convertible models. The panel comes with an access hole for the window. This is the panel that goes over the top of the inner wheel well and is next to the rear seat area. Use with our rear inner wheel well housings (#10425 LH and #10426 RH).
This is a right (passenger) side 1955-1957 inner front quarter panel for the convertible models. The panel comes with an access hole for the window. This is the panel that goes over the top of the inner wheel well and is next to the rear seat area. Use with our rear inner wheel well housings (#10425 LH and #10426 RH).
This is a left (driver) side 1955-57 convertible drain channel brace reinforcement. It helps to support the drain channels for proper drainage.
This is a right (passenger) side 1955-57 convertible drain channel brace reinforcement. It helps to support the drain channels for proper drainage.
This left (driver) side 1955-1957 lower "B" pillar repair panel will fit the 2 door hardtop and convertible only.
This right (passenger) side 1955-1957 lower "B" pillar repair panel will fit the 2 door hardtop and convertible only.
This is a left (driver) side 1955-1957 floor pan that goes under the rear seat. It fits all models.
Cart does not calculate shipping charges; we will contact you with charges.
This is a right (passenger) side 1955-1957 floor pan that goes under the rear seat. It fits all models.
This 1955-57 center trunk floor is made in America out of OEM quality heavy gauge sheet metal. This piece fits all except the wagon models.
Cart does not calculate shipping; with we will contact you with charges.
These corner patch panels are the perfect way to add strenght to your exsisting inner trunk corners. This is a left (driver) side 1955-1957 inner trunk wall corner patch.
These corner patch panels are the perfect way to add strenght to your exsisting inner trunk corners. This is a right (passenger) side 1955-1957 inner trunk wall corner patch.
Cart does not calculate shipping charges; we will call you with charges.
This is a left (driver) side 1955-1957 inner trunk wall repair section for the hardtop models.
This is a right (passenger) side 1955-1957 inner trunk wall repair section for the hardtop models.
Cart does not calculate shipping; we will contact you charges.
This is a left (driver) side 1955-1957 inner wheel well housing repair section for the 2 door hardtop and 2 door sedan. Does not fit the wagon.
This is a right (passenger side) 1955-1957 inner wheel well housing repair section for the 2 door hardtop and sedan. Does not fit the wagon.
This is a left (driver) side.
This is a right (passenger) side 1955-1957 toe board.
This is a left hand 1955-57 rear body mount brace for the convertible models only.
This is a right (passenger side) 1955-57 rear body mount brace for the convertible models only.
This is a left (driver side) 1955-57 center long brace end. It is the end brace of #1036.
This is a right (passenger side) 1955-57 center long brace end. It is the end brace of #1036.
This is a left (driver) side 1955-57 front short brace end. It is the end of brace #1039 and #1040.
This is a right (passenger side) 1955-57 front short brace end. It is the end of brace #1039 and #1040.
